Speed up your PC in minutes
If you get a repeatable error level read10 error code, this tutorial was written to help you.
Not sure if this is the recommended place to post.
I see urgent warnings and errors in / var / adm / messages like the following:
[ID 107833 kern notice] 0x0 asc: (no additional wisdom information), ASCQ: 0x0, FRU 0x0
[ID 107833 kern notice] 0x0 asc: (unrecoverable verification error), ASCQ: 0x0, FRU 0x0
They actually seem to happen every 5 seconds for vi tries, then wait 8 minutes on the phone, then wait 1 hour 5 minutes, then stop.
Too much has happened in the past few days, and I hope the system stops for a short time after 3. It seems like every recording starts around 1900.
The system drives are c6t0d0 and c7t0d0. Metadb was supposed to be used to mirror them, and the view database replica is on slice c6t0d0s6.
Hello, we just migrated from DMX3 -> dmx4 / 2k, I have a process where the host is throwing repeated errors for R1 devices. Consumers originally had this host accessing the person’s dmx2k frame, but now this is done by accessing devices from dmx4. We’ve done everythingstates that completed r2 to dmx2k write_disabled as soon as the migration was done. After disconnecting the device, we seem to be getting these inconsistencies, but since the host is more likely to access the devices, I don’t understand the recurring errors.
Sensible Aug 02:19:29 tkodcdbu3pudb1-m For errors Command: read (10) Error Level: Repeatable
Aug 30.02:19:29 tkodcdbu3pudb1-m scsi: [ID 107833 kern.notice] Block requested: 67264 Error block: 67264
Aug 24 02:19:29 tkodcdbu3pudb1-m scsi: [core id 107833.notice] EMC vendor: serial number: 06B94000W
Aug 26 02:19:29 tkodcdbu3pudb1-m scsi: [ID 107833 kern.notice] Discovery Key: Attention Block
Aug 30 02:19:29 tkodcdbu3pudb1-m scsi: [ID 107833 kern.notice] ASC: 0x29 (enable, reset or reset the bus to zero), ASCQ: 0x0, FRU: 0x0
Last Published: December 31, 2010
Reviews: 0 0
In a true Storage Foundation for Clustered File System (SFCFS) environment, the system typically logs a warningSCSI Release Reservation messages during Cluster Volume Manager (CVM) failover. -3 PR) Write Exclusive Registrar-Only (WERO) Hard Drive Reserves are required and are removed from the original CVM master so that the new CVM master can continuously perform backups. The SCSI discovery event and / or associated SCSI messages are logged by the host systems.
The following SCSI warning messages are included in the CVM master failover log. These warning messages are normal during a switchover. These are recurring errors, and the corresponding system will repeat I / O accordingly.
Sep 08:46:13 hostxxx scsi: [ID 107833 kern.warning] WARNING: / pci @ 1.700.000 / SUNW, qlc @ 0 / fp @ 0.0 / ssd @ w50060e8005b15410,148 (ssd1869):
Sep 08: 46: 13 hostxxx 9 Error for command: read (10) Error level: reproducible
Sep 08: 46: 13 hostxxx 9 scsi: [ID 107833 kern. notice] requested block 67072: error block: 67072
9. 08:46:13 hostxxx scsi: [ID 107833 kern.notice] Vendor: HITACHI Serial number: 50 0B1540232 Sep 08:46: 13 hostxxx 9 scsi: [ID 107833 kern.notice] Sense Key: Unit Attention
September 9 08:46:13 hostxxx scsi: [ID 107833 kern.notice] ASC: 0x2a (reservation released), 0x4, ascq : FRU: 0x0
November 19: 32:13 hostxxx scsi: [ID 107833 kern.warning] WARNING: / pci @ 3.70000 / SUNW, qlc @ 0 / fp @ 0.0 / ssd @ w50060482d5309fac, 26 (ssd21 ):
27. Nov. 19: 32: 13 hostxxx Write Error (10) Descriptor: Error Level: Repeatable
Nov 24: 32: 13 hostxxx scsi: [ID 107833 kern.notice] Requested 3283888 Excluded: Error block: 3283888
24. Nov. 19: 32: 13 hostxxx scsi: [ID 107833 kern.notice] number: 90 “J” 000Q
24. November 19: 32:13 hostxxx scsi: [ID 107833 kern.notice] Sense Key: Unit Attention
24. November Scsi: 19:32:13 hostxxx [ID 107833 kern.notice] ASC: 0x2a (reservation released), ASCQ: 0x4, FRU: 0x0
Only the following messages are logged in / etc / vx / dmpevent the.log throughout the file:
Wednesday, November 24, 7:32:16 PM SCSI 737: error in path estimation c4t50060482D5309FA3d71s2: opcode = 0x5f attracted the attention of the device (status = 0x2, key = 0x6, asc = 0x2a, ascq = 0x4)
Wednesday, Nov 24, 19:32: 16.739: SCSI error occurred on path c4t50060482D5309FA3d71s2: opcode = 0x5f reports reservation conflict (status = 0x18, key = 0x0, asc = 0x0, ascq = 0x0)
These SCSI warnings are messages that are broadcast during master failover.It is CVM and can be ignored.
Nivel De Erro Read10 Pode Ser Repetido
Read10 Nivel De Error Reintentable
Read10 Poziom Bledu Z Mozliwoscia Ponownych Prob
Niveau D Erreur Read10 Reessayable
Read10 Livello Di Errore Riprovabile
Read10 Foutniveau Opnieuw Te Proberen
Read10 Felniva Kan Forsokas Igen
Read10 ์ค๋ฅ ์์ค ์ฌ์๋ ๊ฐ๋ฅ
Read10 Fehlerebene Wiederholbar
Uroven Oshibki Read10 Mozhno Povtorit